Emulex NQTR0V-NATM Manuel d'utilisateur télécharger pdf (Page 60)

2-40 Chapter 2

NOTE: We suggest you use the default printer server name

when installing the printer server for the first time.

To determine the default printer name, enter the Emulex default printer server

name combined with the Emulex printer server port number. Port numbering

on the NETQue Token Ring is as follows:

• #1 - Parallel port

• #2 - Serial port

For example, NQT01A06A_2 is the NETQue Token Ring serial port.

Default Printer Name: NQT____ ____ ____ ____ ____ ____ _ ____

Switch Settings

A four position switch is located on the network side of the printer server.

The functions of each are shown below. UP indicates a switch is ON and

DOWN shows the switch is OFF.

Position 1

Reset to Factory Defaults

ON = Reset to Factory Default

OFF = Use for Normal Operation

Position 2

Token Ring Speed

ON = 4 Mbits/sec

OFF = 16 Mbits/sec

Position 3

Parallel Port Type

ON = Bi-directional

OFF = Centronics

Position 4

Reserved for Future Use

Figure 2-22: Switch Settings



1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 206 207

Pas de commentaire

Emulex NQTR0V-NATM Manuel d'utilisateur Page 60