Emulex NQTR0V-NATM Manuel d'utilisateur télécharger pdf (Page 138)

AppleTalk 6-3

9) Logout of the printer server:

Server>> logout

Local Login

1) Connect an ANSII compatible terminal or a PC running an ANSII

terminal emulation program to the printer server serial or console port.

Emulex default port configuration is set for 9600 bps, 8 data bits, no

parity, 1 stop bit, DTE type, with softcopy emulation.

2) Press

ESC twice.

This initiates communication between the console terminal and the

printer server serial port.

3) Verify banner.

When the connection is made, the printer server login banner is

displayed.

4) At Enter Username or Help>, enter any two characters.

5) At Server>, enter su:

Server> su

This gives you supervisor status.

6) At Password>, enter system:

Password> system

where system is the default privileged password which does not echo back.

7) Change terminal emulation mode to ANSI.

Server>> change port type ANSI

8) At the Server>> prompt, view or change current parameters.

Refer to the list of commands in the

Command Reference Guide.

9) Logout of the printer server:

Server>> logout

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 206 207

Pas de commentaire

Emulex NQTR0V-NATM Manuel d'utilisateur Page 138