Emulex 110 Guide d'installation télécharger pdf (Page 41)

Booting from the external storage array

Installation and Configuration

Figure 14 Adapter configuration options

4. Type 1 (Enable or Disable BIOS) and press Enter.

As Figure 15 shows, the adapter's boot BIOS is disabled by

default.

Figure 15 Enabling/disabling an adapter

5. Type 1 (Enable) and press Enter.

The screen (as shown in Figure 15) is refreshed, showing a BIOS

status of Enabled. This allows the server to use an array-attached

LUN to be used as a boot device.

6. Press Esc to return to the previous configuration screen (Refer to

Figure 14).

7. Type 4 (Topology Selection) and press Enter.

This displays a screen similar to Figure 16 on page 42.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 239 240

Pas de commentaire

Emulex 110 Guide d'installation Page 41