Emulex 110 Guide d'installation télécharger pdf (Page 216)

216

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Miscellaneous Planning and Procedures

3. At the prompt, type: select x (where x is the number of the hard

disk drive that you want to convert to GPT). The following

information is displayed: "Selected Disk = x".

4. At the prompt, type new gpt to add the GPT information into the

non-volatile RAM (NVRAM).

Note: This step does not create the GPT partition information.

5. At the prompt, type create name="efi system partition"

type=efisys Size=102 to create the Extensible Firmware Interface

(EFI) partition.

Note: The name can be anything you want, but if the name has spaces in

it, the name must have quotes around it. The type must equal either

Efisys, Msres, or Msdata. If a size is not specified, the partition uses the

remaining unpartitioned space. To install Windows, the Msdata partition

must contain at least 2 gigabytes (GB) of free space.

6. At the prompt, type create name="microsoft reserved"

type=msres Size=31 to create the MSR partition.

7. At the prompt, type create name="basic data" type=msdata to

create a partition for the remaining unpartitioned space.

8. At the prompt, type inspect to display the partition information.

9. At the prompt, type exit to quit the Diskpart utility.

To install Windows on an external SAN disk using an EFI RAMDISK,

refer to “Installing Windows on an external SAN disk using an EFI

RAMDISK” on page 79.

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 239 240

Pas de commentaire

Emulex 110 Guide d'installation Page 216