Emulex LP21000 Manuel d'utilisateur télécharger pdf (Page 39)

The OneCommand Manager User Manual Page 29

• Local Management Plus - This setting only allows management of adapters on this host, but

management of adapters on this host from another host is possible.

• Full Management - This setting enables you to manage adapters on this host and other hosts

that allow it.

If Management Mode was enabled during installation, you can also set read-only mode.

• Read-only operation - This setting prevents certain operations from being performed, such as

resetting adapters, updating the adapter firmware image and changing adapter settings and

driver properties. Dialog box controls that pertain to these tasks are completely hidden or

disabled.

To change management/read-only mode:

In Windows

1. From the File menu, select Management Mode. The Management Mode dialog box appears.

Figure 12: Management Mode dialog box

2. Choose the management type and read-only mode you want.

3. Click OK.

In Solaris

1. Run the following script:

/opt/ELXocm/set_operating_mode

2. Choose the management type and read-only mode you want.

In Linux

1. Stop the OneCommand Manager application.

Note: After making changes, you must restart the OneCommand Manager application to

see the new management mode.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 273 274

Pas de commentaire

Emulex LP21000 Manuel d'utilisateur Page 39