Emulex LP21000 Manuel d'utilisateur télécharger pdf (Page 222)

The OneCommand Manager User Manual Page 212

Driver Parameter Commands

DriverConfig

Supported by: Windows, Linux and VMware ESX

Syntax:

hbacmd DriverConfig <WWPN> <FileName> <Flag>

Description: This command sets all driver parameters to the values in the .dpv file type. The .dpv file’s

driver type must match the driver type of the host platform adapter.

Parameters:

WWPN - Adapter’s WWPN

FileName - Name of the .dpv file (stored in the Emulex Repository directory)

Flag -

G = Make change global (all adapters on this host)

N = Make change non-global (adapter-specific)

GetDriverParams

Supported by: Windows, Solaris, Linux and VMware ESX 4.0.

Syntax:

hbacmd GetDriverParams <WWPN>

Description: This command shows the name and values of each parameter.

Parameters:

WWPN - Adapter’s WWPN

Note: Supported for FC and FCoE ports only.

Note: Driver parameters that are set temporarily and globally (using the "G" and "T"

flags) must be read using the "GetDriverParams" hbacmd command to view the

current value of the parameter. The "GetDriverParamsGlobal" hbacmd command

returns only permanently set driver parameter values. Additionally, if temporary,

global values have been set for one or more driver parameters, the "SaveConfig"

hbacmd command must be run with the "N" flag (using the "N" flag is analogous to the

hbacmd command "GetDriverParams") to force the driver parameter values for the

specified adapter to be saved. Inaccurate values may be saved if the "G" flag is used

for this command.

Note: The DriverConfig and SetDriverParamDefaults commands are not supported

for Solaris.

Note: For managing ESX/ESXi hosts from a Windows client, add the m=cim option to

the command. The default CIM credentials must be set using the SetCimCred

command. See “SetCimCred” on page 244.

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 273 274

Pas de commentaire

Emulex LP21000 Manuel d'utilisateur Page 222