Emulex LP21000 Manuel d'utilisateur télécharger pdf (Page 135)

The OneCommand Manager User Manual Page 125

• From the discovery-tree, right-click the port whose name you want to change and select

Restore Default Name.

Resetting Adapter Ports (FC/FCoE Ports Only)

You can reset remote and local adapter ports. (Not available in read-only mode or on NIC or iSCSI

adapter ports.)

To reset the adapter port:

1. In the discovery-tree, select the adapter port you want to reset.

2. Do one of the following:

• From the Port menu, click Reset Port.

• Click the Reset toolbar button .

The following warning appears:

Figure 71: Reset Warning

3. Click Yes. The adapter port resets.

The reset can require several seconds to complete. While the adapter port is resetting, the sta-

tus bar shows “Reset in progress.” When the reset is finished, the status bar shows “Reset Com-

pleted”.

Caution: Do not reset your adapter port while copying or writing files.

This could result in data loss or corruption.

Note: For OneConnect FCoE ports, a reset is only necessary to activate updated driver

parameters or FIP settings. It does not actually perform an adapter level reset of the

port.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 273 274

Pas de commentaire

Emulex LP21000 Manuel d'utilisateur Page 135