Emulex LP9802DC Manuel d'utilisateur télécharger pdf (Page 63)

lpfcN: 48 : Enable interrupt handler failed

This error occurs if the driver cannot assign an interrupt vector to the host adapter.

ACTION: Check the configuration of the adapter in the system.

ERROR always lp6000.c

lpfcN: 49 : Adapter Hardware Error

A FireFly error interrupt occured and the status register indicates a non-

recoverable error. The adapter status register is recorded.

ACTION: This error usually indicates a hardware problem with the adapter, run

diagnostics.

ERROR always lp6000.c

lpfcN: 50 : Stray Mailbox Interrupt

Received a mailbox command completion and the mailbox is not owned by the

host. The mailbox command and status are recorded.

ACTION: This error could indicate a software driver or firmware problem. If the

problems persist, report these errors to technical support.

ERROR always lp6000.c

Emulex Documentation, Drivers, and Software

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 69

Pas de commentaire

Emulex LP9802DC Manuel d'utilisateur Page 63