Emulex LP9802DC Manuel d'utilisateur télécharger pdf (Page 48)

lpfcN: 3 : Device Discovery completion error

This indicates that an uncorrectable error was encountered during device (re)

discovery after a link up. Fibre Channel devices will not be accessible if this

message is displayed. The location within the driver is recorded.

ACTION: Reboot the system. If the problem persists, contact technical support.

Run with verbose mode on for more details.

ERROR always fcelsb.c

lpfcN: 4 : Device Discovery completes

This indicates successful completion of device (re)discovery after a link up. The

location within the driver is recorded.

ACTION: None needed.

WARNING DISCOVERY verbose fcelsb.c

lpfcN: 5 : Unknown ELS [command response IOCB]

An ELS command, ELS response, or ELS ring IOCB are not supported or have an

illegal value.

The illegal/unknown value is recorded.

ACTION: This error could indicate a software driver or firmware problem. If the

problems persist, report these errors to technical support.

ERROR always fcelsb.c

Emulex Documentation, Drivers, and Software

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 68 69

Pas de commentaire

Emulex LP9802DC Manuel d'utilisateur Page 48