Emulex LP9802DC Manuel d'utilisateur télécharger pdf (Page 55)

lpfcN: 24 : Command ring timeout

An IOCB command was posted to a ring and did not complete within a timeout

based on R_A_TOV. The ring number and the IOCB command are recorded.

ACTION: This error could indicate a software driver or firmware problem. If no I/O

is going through the adapter, reboot the system. If these problems persist, report

the errors to technical support.

ERROR always fcscsib.c

lpfcN: 25 : Mailbox command timeout

A mailbox command was posted to the adapter and did not complete within 30

seconds. The mailbox command and status are recorded.

ACTION: This error could indicate a software driver or firmware problem. If no I/O

is going through the adapter, reboot the system. If these problems persist, report

the errors to technical support.

ERROR always fcscsib.c

lpfcN: 26 : FAN timeout

A link up event was received without the login bit set, so the driver waits E_D_TOV

for the fabric to send a FAN. If no FAN if received, a FLOGI will be sent after the

timeout.

ACTION: None needed. The driver recovers from this with a FLOGI to the fabric.

WARNING always fcscsib.c

Emulex Documentation, Drivers, and Software

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 68 69

Pas de commentaire

Emulex LP9802DC Manuel d'utilisateur Page 55