Emulex LP21000 Manuel d'utilisateur télécharger pdf (Page 109)

The OneCommand Manager User Manual Page 99

Figure 57: OneConnect Adapter Information tab

To change the personality of a OneConnect adapter:

1. From the discovery-tree, select the OneConnect adapter whose personality you want to change.

The Adapter Information tab is displayed.

2. From the Personality area of the Adapter Information tab, select the personality type you want

and click Apply.

3. Reboot the host for the personality change to take effect.

Configuring the FC/FCoE Adapter Driver

The OneCommand Manager application displays available driver parameters along with their defaults

and maximum and minimum settings. A description of the selected parameter is also provided. This

section contains information you should be aware of when working with driver parameters. For a more

detailed description of specific driver parameters, refer to the appropriate Emulex driver User Manual.

(Not available in read-only mode.)

Note: If the adapter does not support personalities, personality controls are not displayed.

Also, if the adapter does not support a particular personality type that control is

disabled.

Note: This section only applies to FC and FcoE adapters. It does not apply to NIC-Only and

iSCSI adapters.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 273 274

Pas de commentaire

Emulex LP21000 Manuel d'utilisateur Page 109