Emulex LP1005DC-CM2 Manuel d'utilisateur télécharger pdf (Page 35)

Driver for Linux - Configuration Section Page 29

3. Click a target in the discovery tree.

Figure 9: The HBAnyware Target Attributes Tab

Target Attributes Field Definitions

• Mapping Information

• FC ID - the Fibre Channel ID for the target; assigned automatically in the firmware.

• SCSI Bus Number - defines the SCSI bus to which the target is mapped.

• SCSI Target Number - the target's identifier on the SCSI bus.

• Node WWN - the unique 64-bit number, in hexadecimal.

• Port WWN - the unique 64-bit number, in hexadecimal.

• OS Device Name - operating system device name.

View LUN Attributes

The LUN Attributes tab in HBAnyware contains information specific to the selected logical unit number

(LUN).

To view the LUN attributes:

1. Start HBAnyware.

2. Do one of the following:

• From the menu bar, click View, then click Group HBAs by Host Name.

• From the toolbar, click the Group HBAs by Host Name button.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 161 162

Pas de commentaire

Emulex LP1005DC-CM2 Manuel d'utilisateur Page 35